Antique and Collectable Autos, Inc.

BODY

Including main body, doors hung and latched, trunk lid hung, floor, tunnel cover, dash board, garnish moldings and firewall.

Hand-crafted fiberglass laminate featuring: hand laid layers of fiberglass, durable gelcoat surface and inner core, providing high strength and superior surface quality. All high stress areas are reinforced with heavy woven roving [woven strands of fiberglass at 90 degrees , used in most boat manufacturing] providing the strongest most durable body in the industry.

No fiberglassing required: all inner components, floor, firewall, trunk liners and door liners are pre-glassed and bonded in place. Doors and trunk liners are bonded together in the molds with custom fixtures for precise and accurate placement.

Door frames and dash are supported with hardwood and plywood inner structure for stability and solid mounting of hinges and latches.

Trunk hinge pivots are steel reinforced, precisely located and fiberglassed in place.

Doors and trunk lid come hinged to the body using taped sandwich plates behind inner liners for strength and adjustablity

Top is chopped 3 " from original height

Doors are latched with bear claw rotary safety latches and come in either suicide or rear opening doors

We mold our own bodies, to exact outer dimensions using original specifications, utilizing our 21 years experience in the fiberglass industry. Our vast experience allows us to offer bodies in kevlar and kevlar-carbon fiber, bodies are so well aligned that we remove all flash lines [ lines formed from seams in multiple piece molds ] from the gelcoat surface. All fiberglass components go through our 12 point total cure process, insuring no post cure, and are inspected at each step of production. Every component is machined buffed to insure that the surface is even, flat and shiny.

These features combine to give our customers with the highest quality body and ease of assembly.

Fender - Running Board Package:
including front fenders, rear fenders,running boards, rear panel and front splash panels
$895.00

3 Piece Fiberglass Hood
$395.00

Steel Hood:
Style and pricing upon request

Stock Frame:
Frame rails are reproduced from original design and mig and tig welded for superior strength and durability

107" wheel base

Main rails fabricated from 10 gauge cold finished mild steel

Cross section of main rail at it’s tallest point is 5 1/2" x 1 7/8"

All frame rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail

All holes in frame rails are precisely located and predrilled with a custom fixture

Frame is cross-braced with k member formed from 10 gauge mild steel to shape 5 1/4" x 1 5/8" channel

Access holes are cut in k member for ease of routing exhaust, brake lines and fuel lines

Frame rails in front and rear of k member are boxed for added strength and appearance

All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly

Front cross member is setup for stock or tubular Mustang II front suspension and is formed from 3/16" cold finished mild steel with all mounting point for upper and lower control arms and rack and pinion steering precisely located with custom fixtures

Front strut mounting brackets are made from 5/16" cold finished mild steel with a 1/4" gusset for added strength

Rear cross member is constructed from 2" x 2" square tubing with 1 ¼" dia. Threaded bar stock for mounting of coilover shocks

Available in Pro-Street.

Chevy Options
(Highlighted names are hyperlinked to pictures)

Triangulated Rear Suspension: used on Stock Frames
Triangulated four link arms setup for coilover shocks.
Each four link arm has a single adjuster for fine tuning rear end location and adjusting of pinion angle.
Link arms are made from 1" diameter .156" heavy wall D.O.M. tubing with urethane bushings and a inner sleeve to accept 9/16" bolts.
All mounting brackets for attachment to frame and rear end housing are provided.
$395.00

Pro-Street Frame:
Narrowed rear frame rails ready to accept 5 link rear suspension and tubbed body.

Pro-Street Rear Suspension:
Parallel four link with the addition of a panhard bar.
$495.00

Pro-Street Wheel Well Fiberglass Tubs Installed:
Fiberglass wheel tubs added to body matching Pro-Street frame
$395.00

Rear Coil-Over Shocks
Fully adjustable shocks with matching spring rates.
$375.00

Motor Mounts
Steel mounts that weld in place and are matched to your motor style and type.
$125.00

Brake Pedal and Master Cylinder Bracket:
Attaches to frame member and uses a 3/4" oil impregnated bronze bushing as a pivot for the pedal arm. A 3/8" self aligning rod end is used to actuate the master cylinder.
$195.00

Window Glass:
Pre-Cut laminated safety glass for doors, windshield and rear windows.
$395.00

Power Window Regulators: $405.00
Complete system for electronically raising and lowering door glass includes wiring and switches.
Installed with glass purchase add $200.00

Window Tracks & Channel Kit: $95.00

Heater / Defroster:
Small unit that easily fits up behind dashboard.
$225.00

Headlights 7" Chrome:
$95.00

Grill Shell:
$155.00

Grill Shell with Insert:
$475.00

Gas Tank Steel:
$289.00

Gas Tank Stainless Steel:
$429.00

Gauges:
5 gauge set including speedometer, oil pressure, voltmeter, temperature and fuel gauge. Tachometer and fuel sender available.
275.00

Wiring Harness:
$395.00

Radiator Standard:
$595.00

Radiator with Air:
$695.00

Rolling Chassis:
Following equipment installed on our frame

Front upper and lower stamped control arms

Strut rods and bushings

Manual rack and pinion steering with tie rod ends and busings

Mustang II spindles and brake brackets

5 lug rotors, bearings seals

Front calipers and pads

Front coil springs

Front shocks

9" ford rear housing with axles, bearings and seals

Non posi 9" center section

11" rear brake drums and loaded backing plates

Brake pedal assembly and master cylinder

Salvage yard tires

* Does not include cost of the frame, rear link arm setup and rear coilover shocks.
$3495.00

Options:
Posi rear add $500.00
Power steering add $125.00
Rubber brake hoses, steel brake lines, brake brackets, line clamps and adjustable proportioning valve installed add $375.00
11" Front disc brakes add $150.00
11" Rear disc brakes and $150.00

Turnkeys:
Cars that are completely built to your specifications, pricing upon request.

**ALL PRICES SUBJECT TO CHANGE WITHOUT NOTICE**

All Street Rods can also be customized with any of the accessories on our Accessories Page.